You hear the familiar clicking sound when you turn the knob, but your gas burner won’t light. It’s a common, frustrating problem. Before you call for service, here are a few simple checks you can do yourself.
1. Clean the Burner Cap & Head
Food spills or grease can block the gas flow or prevent a spark.
Action:
Lift off the burner cap. Wipe the cap and the burner head underneath with a dry cloth. Use a toothpick or needle to clear any clogged holes. Let everything dry completely before replacing it.
2. Check for Moisture
Spills or recent cleaning can leave water in the igniter area.
Action:
Dry every part thoroughly, including caps, heads, and the stove top around the burner.
3. Ensure Proper Alignment
If the burner’s head is misaligned, the spark won’t reach the gas.
Action:
When replacing the head, make sure it’s sitting level and flush. The igniter electrode (the small metal tip near the burner) should be close to, but not touching, the head.
4. Test Another Burner
Try lighting a different burner on the same side of the stove. If it also fails, the issue might be with the gas line or a larger electrical component.
Contact Us for Professional Gas Stove Repair in Virginia:
A stove that clicks without a flame isn’t just frustrating — it can be a sign of a deeper gas flow or ignition issue. Stay safe and leave it to the pros at Home Appliance Care. We offer fast, reliable services across Alexandria, Arlington, McLean, and surrounding Virginia areas.
Call us today: (571) 206-1560.
Visit: homeappliancecare.us
Stove Clicking but No Flame? — Frequently Asked Questions
If the parts are clean, but it still won’t light, you likely have a faulty spark igniter or a failed spark module.
This is usually caused by a short circuit in the ignition switch, often due to trapped moisture or grease.
Yes. If you smell gas and there is no flame, turn the knob to “Off” immediately. This means gas is leaking into your home without igniting, creating a serious fire and explosion hazard.